B.E.G. Brï¿½ck Electronic GmbH

FLAT Ceiling-mount sensors
FLAT
	FLAT-P-PP-A-FC
	FLAT-P-PP-DIM-FC
	FLAT-S-PP-FC

Products >> FLAT Ceiling-mount sensors >> >>FLAT-P-PP-DIM-FC

FLAT-P-PP-DIM-FC

Designed for indoor and dry locations
Compatible with the B.E.G. Controls power pack PP-DIM-J and FP-DIM-J. Some features and settings are not available when used with fixture mount power pack FP-DIM-J. Please refer to the installation and operation instructions for details.
Works with the B.E.G. Controls power pack PP-DIM-J and FP-DIM-J
Aesthetic virtually flat ceiling profile
Visible dimensions from below ceiling: 0.03 inch / H 0.85 mm
Aesthetic virtually flat ceiling profile
Visible dimensions from below ceiling: 0.03 inch / H 0.85 mm
Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage (PP-DIM-J power pack only). The FP-DIM-J power pack does not support multiple sensors.
Operating modes include motion detection/daylight harvesting, daylight harvesting only, or motion detection only
Actions upon motion detection: Automatic On, Partial-On at dim level, Manual On
Actions upon vacancy: Automatic-Off, Partial-Off at dim level, Timed Partial-Off at dim level then Automatic-Off
Spring clips for quick and easy installation in suspended ceilings and light fixtures
5 years limited warranty
Masking blinds included
All programmable features can be adjusted using our free Android and iOS apps (requires IR-ADAPTER, part number 92726 sold separately).
ROHS and REACH compliant
Photosensor included as a standard feature
Accessory snap-on trim rings are offered in several popular colors or for field painting. Please see accessory ordering information for options.
Indoor applications: Private and Open Offices Conference Rooms School/University Classrooms Corridors Healthcare and Laboratory Spaces

Type

Part no.

FLAT-P-PP-DIM-FC

97041

Technical data

Operating voltage: 24 V DC from B.E.G. Controls Power Pack PP-DIM-J or FP-DIM-J
Power consumption: < 0.5 W
Recommended height for mounting min.: 7 ft / 2.0 m
Recommended height for mounting max.: 16 ft / 5.0 m
Suitable Environment: -13 °F to 122 °F / -25 °C to +50 °C
Housing: UV- and shock resistant 5VA material
Cable length: 9.8 ft / 300 cm
Remote controllable: IR-Adapter with Smartphone App (Android / iOS)
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.

Channel 1

Daylight Modes: Fault, Test, Fully automatic, Semi-Automatic
Brightness set value: 2 - 100 fc / 20 - 1200 lux
Follow-up time: 30 sec. - 30 min.
Orientation light: 0 % - 50 % of nominal light
Factory settings: 46 fc / 500 Lux, 10 min.

Downloads FLAT-P-PP-DIM-FC

Specification Details [...]

Downloads

Manual (2236kb)

Datasheet (2497kb)