B.E.G. Brï¿½ck Electronic GmbH

Secondary low voltage sensor for use with any PP power packs (requires primary sensor on same power pack)
One FLAT primary sensor is required on the same power pack for the FLAT-S-PP-FC to function. Refer to tech sheets for part numbers 97032 (FLAT-P-PP-A-FC) and 97041 (FLAT-P-PP-DIM-FC), and the appropriate power pack
Designed for indoor and dry locations
Works with the B.E.G. PP series power packs
Aesthetic virtually flat ceiling profile
Visible dimensions from below ceiling: 0.03 inch / H 0.85 mm
Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage.
Spring clips for quick and easy installation in suspended ceilings and light fixtures
5 years limited warranty
Masking blinds included
All programmable features are adjusted using our free Android and iOS smartphone apps (requires IR-ADAPTER, part no. 92726 sold separately)
ROHS and REACH compliant
Accessory snap-on trim rings are offered in several popular colors. Order the white trim ring for field painting. Use paints suitable for polyethylene plastic
Indoor applications: Private and Open Offices Conference Rooms School/University Classrooms Corridors Healthcare and Laboratory Spaces

FLAT-S-PP-FC

97033

Operating voltage: 24 V DC from B.E.G. Controls Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
Power consumption: < 0.5 W
Detection area: circular 360Â°
Detection range: max. Ø 30 ft / 9 m across
max. Ø 20 ft / 6 m towards
max. Ø 10 ft / 3 m smaller movements
Recommended height for mounting: 8 ft / 2.5 m
Operating temperature:
UV- and shock resistant 5VA material
Material color: White
Cable length: 350 cm, screened
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.