Search by 5-digit Product Code
   


Power Packs
PP-A

PP-1

PP-DIM

FP-A-J

FP-DIM-J

  Mini power pack FP-DIM-J
image
   Mini power pack FP-DIM-J
  • Full-featured miniature power pack for use with low voltage MINI (97181, 97188, 97191, 97198) and FLAT (97041) "DIM" occupancy/daylight sensors. For future product compatibility, please contact B.E.G. Controls
  • Designed for OEM integral fixture control applications
  • Miniature case size accommodates limited fixture channel space
  • Requires 0-10 V analog dimmable devices (i.e. LED drivers, fluorescent ballasts). The DIM output supplies up to 10 mA of sourcing current.
  • Supports one primary sensor. Parallel connection of secondary sensors is not supported.
  • Terminals accept a wide range of wire gauges. Line voltage terminals accept 12-20 AWG, low voltage DIM terminals accept 16-24 AWG. Solid copper wire recommended.
  • Line voltage switch input to toggle lighting load relay and dim/override sensor (normally open momentary dry contact)
  • RJ-12 sensor connection port
  • Status and fault LED for easy troubleshooting
  • Manual (vacancy)/automatic (occupancy) modes and all other features are set via IR remote control through the sensor using our free Android and iOS apps (requires IR-ADAPTER, part number 92726 sold separately)
  • Operating modes include motion detection/daylight harvesting, daylight harvesting only
  • Actions upon motion detection: Automatic On, Manual On
  • Actions upon vacancy: Automatic-Off, Partial-Off at dim level, Timed Partial-Off at dim level then Automatic-Off
  • Integral short circuit and thermal protection
  • 5 years limited warranty
  • ROHS and REACH compliant

 
   Type Part no.   
   Mini power pack FP-DIM-J 97081   
   Technical data
  • Type of controller: 1.B
  • Power consumption: < 0.7 W
    • Max. rating
  • Switching output load: 5 Amp fluorescent and LED @ 120-277 VAC/ 60 Hz, AWG 12-20
  • DIM output: 0-10 VDC analog, max. 10 mA, AWG 16-24
  • Control input: 120-277 VAC, 60 Hz, AWG 12-20
  • Operating temperature: 23 °F to 113 °F / -5˚C to + 45˚C
  • Housing: Bayblend FR3310TV+(Z)
  • Protection: Suitable for indoor use and dry locations onlyy
  • Pollution degree: 2
  • Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.
  • Control Action: Type 1
  • Dimensions:
    7.01 x 1.02 x 1.02 inch /
    178 x 26 x 26 mm
  • Mounting (ear holes): 6.625" on center x 0.5" on center
  • Mounting (ear slot): 6.5" on center
  • Weight: 2.6 Oz
  • RJ-12 Sensor port: MINI-P-PP-DIM-FC or FLAT-P-PP-DIM-FC
   Downloads Mini power pack FP-DIM-J
  Specification Details [...]
   Downloads
 Datasheet (234kb)



Copyright: ® 2024-04-20 - B.E.G. Controls (Imprint)
http://get.adobe.com/de/flashplayer/