Search by 5-digit Product Code
   


Power Packs
PP-A

  Power pack PP-A-J
   
 
PP-1

PP-DIM

FP-A-J

FP-DIM-J



image
   Power pack PP-A-J
  • 24V sensor power pack, switching, auxiliary relay, RJ-12 port for sensor connection
  • Full-featured power pack that provides power and switching control to B.E.G. low voltage occupancy sensors and photosensors.
  • Suitable for parallel connection of one mandatory primary and maximum four optional secondary sensors to increase detection coverage.
  • Integrated manual (vacancy)/automatic (occupancy) mode switch
  • LED status and fault indicators
  • ½ inch trade size threaded nipple with two lock nuts included.
  • Switch input to toggle lighting load relay/override sensor (normally-open momentary dry contact)
  • Switch input to toggle HVAC isolated control relay (normally-open or normally-closed momentary dry contact)
  • RJ-12 sensor port. Splitter accessory available to connect multiple sensors. See ordering information.
  • Integral short circuit and thermal protection
  • 5 years limited warranty
  • ROHS and REACH compliant
  • Applications:
  • Use with integral low voltage fixture motion or photo sensor
  • Motion/photocell switching and dimming control of 0-10 V / 1-10 V analog dimmable lighting loads (LED, fluorescent)
  • Occupancy sensor switching control of small motors (i.e. restroom ventilation fan)
  • Occupancy sensor switching control of receptacles
  • Vacancy sensor application (requires a wall switch manual on)
  • Sensor application requiring a wall switch override
  • Sensor application requiring a dry contact input from a control system
  • Vacancy (Manual) operation is achieved by combining the PP-A-J power pack with a low voltage momentary contact switch and setting the integral mode switch to “manual”.

 

   Type Part no.   
   Power pack PP-A-J 97020   
   Technical data
  • Power supply: 120 - 277 V 50 /60 Hz
  • Control input: 2 control inputs (Motion and HVAC). Normally-open momentary contact switch or dry contact closure. mA
  • Operating temperature:
    -4 °F to 122 °F / -20 °C to +50 °C
  • UV- and shock resistant 5VA material
  • Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.
  • Switching power: max 20A @277 V AC 50/60 Hz
    1hp @277VAC 50/60 Hz

   Downloads Power pack PP-A-J
  Specification Details [...]
   Downloads



Copyright: ® 2024-03-29 - B.E.G. Controls (Imprint)
http://get.adobe.com/de/flashplayer/