- Traditional Ceiling Mounted Sensors
- Completely flat ceiling sensors
- Ceiling sensors. Superior coverage at 1/8th the size
- Large area and high-bay sensors
(Light/Temp/Motion) - The easy way to integrate with BMS
- Wall mounted sensors. Perfect for stairwells and open ceiling applications
- Wall switch sensors
Programming and Hardware Accessories
- Advanced Control Platform
Search by 5-digit Product Code
MINI Ceiling-mount detectors
MINI-GH - High-bay sensors
MINI-IP65 - High-humidity sensors
MINI Ceiling-mount detectors >>
MINI secondary sensor for use with any PP power packs (requires primary sensor on same power pack)
One MINI primary sensor is required on the same power pack for the MINI-S-PP-FC to function. Refer to tech sheets for part numbers 97180, 97181, 97182 and the appropriate power pack.
Designed for indoor and dry locations
Works with the B.E.G. PP series power packs or proprietary low voltage system
Up to 4 Secondary sensors may be connected with a primary sensor to increase motion detection coverage. 2-way male to female RJ-12 splitter included.
Spring clips for quick and easy installation in suspended ceilings and light fixtures
5 years limited warranty
Masking blinds included
Programmable features cannot be adjusted via the secondary sensors, only the primary sensor.
ROHS and REACH compliant
Trim rings are removable for field painting. Use paints suitable for polyethylene plastic. Accessory rings are offered in several popular colors and in two different sizes. Please see accessory ordering information for options.
Private and Open Offices Conference Rooms School/University Classrooms Corridors Healthcare and Laboratory Spaces
Vacancy (Manual) operation is achieved by combining the MINI primary sensor, MINI-S-PP-FC, and PP power pack with a low voltage momentary contact switch. For high mounting applications please refer to MINI-S-PP-GH-FC, part number 97187. For outdoor and wet location applications please refer to MINI-S-PP-W-FC, part number 97193.
Operating voltage: 24 V DC from B.E.G. Controls Power Pack PP-1-J or PP-A-J, or compatible power supply by others. Please contact B.E.G. Controls to confirm compatibility with power supplies by others.
Power consumption: 1 W
-13 °F to 122 °F / -25 °C to +50 °C
UV- and shock resistant 5VA material
Cable length: 9.8 ft / 300 cm
Compliances: ETL listed for the U.S. and Canada (UL STD 60730-1 and CSA STD E60730-1). UL 2043 plenum rated.
Specification Details [...]
MINI sensors application guide
Copyright: ® 2022-10-06 - B.E.G. Controls